PIRA 5K40.10 - Motors and Generators:
Cenco Motor
Photo Shows the Apparatus Used at the University of Texas at Austin
Instructions / Notes:
-
Using the 6V power supply, assemble the Cenco Motor as shown above.
- Attach the red cable from the positive output of the battery supply to the red banana plug of the Cenco Motor.
- Attach the black cable from the negative output of the battery supply to the black banana plug of the Cenco Motor.
- To turn on the Cenco Motor, connect the power supply to an outlet.
- The power output of the battery supply can be adjusted by turning the grey knob. DO NOT EXCEED PAST THE 6V MARK.
Last Updated 2023 - University of Texas at Austin Physics Dept.
- All Rights Reserved.